Turbo actuator tester, Common Rail diagnostic equipment, automotive oscilloscope testers

Car diagnoscope DM-1


The DM-1 microprocessor car diagnoscope supports electrical and electronic equipment regardless of a vehicle make or model. This small and handy device provides a wide range of possible applications, similar to those offered by the most expensive stationary diagnoscopes.

These are the examples of the diagnoscope test functions:

  • ABS Sensors
  • Alternator - ripple voltage
  • Battery voltage
  • Camshaft position sensor
  • Crankshaft position sensor
  • Knock sensor
  • Flow meter
  • Vacuum sensor
  • Pressure sensor
  • Throttle position sensor
  • Coolant temperature sensor
  • Oil temperature sensor
  • Air temperature sensor
  • Vehicle speed sensor
  • Ignition distributor sensor
  • Tank system
  • Exhaust Gas Recirculation System
  • Idle speed adjustment
  • Ignition system
  • Injectors
  • CAN bus/BUS protocol
  • . . . and many others


Technical specifications for the DM-1 diagnoscope:

Analog-to-digital converter: 32 MHz
Input frequency: 1 MHz (-3dB dla 1V/dz)
Input impedance: 1 MW/20pF
Input voltage range: -100V - 100V to the top (without probe x10)
Input signal type: AC, DC, GND
Resolution: 8 bit
Linearity: +/- 1bit
Display: Backlit monochrome LCD, 64 x 128 pixels
DC voltage measuring range: -80V do 80V (bez sondy x10)
Peak-to peak voltage measurement range: 0 do 160V (no probe x10)
Time base: 1,25us; 2,5us; 5us; 10us; 20us; 50us; 100us;200us; 500us; 1ms; 2ms; 5ms; 10ms; 20ms;50ms; 100ms; 200ms; 500ms; 1s; 2s; 5s; 10s;20s; 30s; 1min; 2min; 5min; 10min; 20min;30min; 1h na działkę
Gain (without probe x10): 5mV; 10mV; 20mV; 50mV; 0,1V; 0,2V; 0,4V1V; 2V; 4V; 8V; 20V per div
Probe calibration output signal x10: 1kHz/ ok. 5Vpp, strengthening 50% (optional)
Number of memory modules: 7
Supply voltage: 11VDC do 15VDC 500mA
Batteries: Typ AA NiMH minimum 1800 mAh - 5 szt.
Maximum battery charging current: 200 mA
Maximum battery life: 10 h
Operating temperature: 0 - 50 deg C
Dimensions: 80x200x120mm
Weight: 450g (without batteries)
 

Diagnoscope DM-1 can also serve as an attachment to the PC turning it into an oscilloscope. The programme used for this function is delivered free of charge as a promotional product.

Newsletter

Cookies

This site is using Cookies, which will be stored in Your browser. More in Privacy Policy. - more