TP-TACT Tester & Programmer | DeltaTech Electronics

Turbo actuator tester, Common Rail diagnostic equipment, automotive oscilloscope testers

TP-TACT Tester & Programmer

The TP-TACT device is intended for testing the operation and programming of the range of work of electronic turbocharger controllers.

With TP-TACT it is possible to perform the following tests:

  • test of electronic controllers of turbochargers with wastegate

  • test of electronic actuators of turbochargers with variable geometry (VTG, VNT).

  • test of dc motors from turbocharger actuators,

  • test of wastegate position sensors or variable geometry position sensors,

  • test of solenoid valves controlling turbocharging pressure, used in pneumatic systems.

Tests can be performed on the following actuators:

  • HELLA actuators – used in many car makes, including: VW/Audi, Mercedes, BMW, Ford, Volvo, Jaguar, Citroen, Land Rover, Dodge, Chevrolet.

  • SIEMENS actuators – used in VW/Audi, Mercedes, BMW, and Porsche cars.

  • MITSUBISHI actuators – used in BMW, Ford 2.2 TDCI, and PSA Group cars with 2.2 HDI engine.

  • SONCEBOZ actuators – used in Land Rover 3.6 TDV8 and 2.7 TDV6,

  • DENSO actuators – used in Toyota cars with 1.4 D-4D and 3.0 D-4D engines,

  • MAHLE actuators – used in VW Group cars with 1.2 TSI engine.

  • HITACHI actuators – used in Opel cars with 3.0 V6 CDTI 184HP engine.


TP-TACT can also be used for reading and programming the range of lever movement of electronic turbocharger actuators. It can do the following things:
  • read parameters of HELLA actuator operation
  • save parameters of HELLA actuator operation
  • copy HELLA actuators
  • change the range of lever movement of HELLA actuator
  • program the range of movement of SIEMENS actuator

Programming the range of work concerns the following turbocharger actuators:

  • HELLA actuators with the following markings:

  1. 712120
  2. 730314
  3. 781751
  4. 763797
  • SIEMENS actuators used in turbochargers meant for VW/Audi group cars with 2.7 TDI and 3.0 TDI engines.

The TP-TACT device can be successfully used both in companies regenerating turbochargers, as well as in automobile repair shops that offer a wide range of repairs in order to diagnose the turbocharger fault.


Contents of TP-TACT kit:

  1. TP-TACT tester

  2. HELLA connection cable (6NW 008 091, 6NW 008 412, 6NW 009 228, 6NW 009 420, 6NW 009 543, 6NW 009 660, 6NW 010 099-01)

  3. HELLA connection cable (6NW 009 206, 6NW 009 550, 6NW 009 483, 6NW 010 430-01, 6NW 010 430-03, 6NW 010 430-04)

  4. HELLA connection cable (6NW 010 099-02)

  5. MITSUBISHI connection cable for BMW

  6. MITSUBISHI connection cable for Ford/PSA

  7. SIEMENS connection cable for VW/Audi

  8. SIEMENS connection cable for Mercedes and BMW

  9. SONCEBOZ connection cable

  10. MAHLE connection cable

  11. DENSO connection cable for Toyota 1.4 D-4D

  12. DENSO connection cable for Toyota 3.0 D-4D

  13. HITACHI connection cable for Opel Vectra C/Signum 3.0 V6

  14. geometry position sensor connection cable for VW/Audi (type 1)

  15. geometry position sensor connection cable for VW/Audi (type 2)

  16. geometry position sensor connection cable for Opel, Fiat, Alfa Romeo

  17. geometry position sensor connection cable for Citroen, Peugeot.

  18. geometry position sensor connection cable for Ford

  19. universal connection cable for:
    - DC motors
    - geometry position sensors
    - boost control solenoid valves

  20. DC power supply

  21. USB cable for firmware update

  22. CD-ROM with Updater tool

  23. User Manual




This site is using Cookies, which will be stored in Your browser. More in Privacy Policy. - more